skip to Main Content

Isomax Clip and Channel – Wall and Ceiling Soundproofing

£3.60£3.98 EX VAT

The IsoMax Acoustic Isolation Clips System is a space saving acoustic solution designed to completely isolate walls and ceilings.

 

Benefits
  • Offers a robust and higher performing alternative to traditional wall and ceiling isolation methods
  • Out-performs standard resilient bar construction by up to 7dB
  • Withstands greater loads than standard systems to provide peace of mind for developers and dwellers
  • Reduces the risk of error at installation stage as screws cannot be inadvertently attached to the stud or joist through the resilient area
  • Works as a space saving solution for either existing or new
    wall constructions with minimal encroachment into living space
  • For situations where fire protection is a consideration fire rated
    wall and ceiling systems are also available
  • Offers one of the most cost effective methods available to
    achieve superior noise control in walls and ceilings
    while using standard materials

Dimensions:

Channel:

L- 1.8m

W- 64mm

D- 23mm

 

Clip:

L- 98mm

W- 25mm

Clear

Description

The IsoMax Acoustic Isolation Clips System is a space saving acoustic solution designed to completely isolate walls and ceilings.

 

Benefits
  • Offers a robust and higher performing alternative to traditional wall and ceiling isolation methods
  • Out-performs standard resilient bar construction by up to 7dB
  • Withstands greater loads than standard systems to provide peace of mind for developers and dwellers
  • Reduces the risk of error at installation stage as screws cannot be inadvertently attached to the stud or joist through the resilient area
  • Works as a space saving solution for either existing or new
    wall constructions with minimal encroachment into living space
  • For situations where fire protection is a consideration fire rated
    wall and ceiling systems are also available
  • Offers one of the most cost effective methods available to
    achieve superior noise control in walls and ceilings
    while using standard materials

Load Specification for IsoMax Acoustic Isolation Clips System

The IsoMax Acoustic Isolation Clips System is designed to carry a drywall furring channel with one or more layers of gypsum wallboard attached.

The maximum design load capacity for the IsoMax Acoustic Isolation Clips System in shear (wall application) or in tension (ceiling application) is as follows. Design load calculations are based on tested loading to failure where the furring channel deforms and pulls out.

Design Load Maximum for Wall or Ceiling Application
22kgs per IsoMax Clip

Installation of IsoMax Clips System – Walls & Ceilings

  • Spacing of IsoMax Acoustic Isolation Clips on the furring channel shall be a maximum of 1200mm
  • Spacing between furring channels shall be a maximum of 600mm
  • Use only the CMS Danskin furring channel per the Furring Channel Requirements section and Load Specification section of this document
  • (Walls only) The first layer of gypsum wallboard shall align seams between sheets on the centreline of the horizontal furring channels
  • (Walls only) The bottom row of IsoMax Acoustic Isolation Clips with furring channel(s) should be a maximum 76mm to the centre of the channel from the floor. The top row should be within 150mm of the ceiling
  • (Walls only) The first row of gypsum wallboard sheets at the bottom of the wall shall be installed with the long dimension supported on 6mm thick  continuous resilient isolation strip, CMS Danskin 3912 Isolation Strip
  • (Ceilings only) The IsoMax Acoustic Isolation Clips should be within 150mm of the ceiling perimeter at the end of the furring channel run
  • (Ceilings only) The first row of channel at the ceiling perimeter should be a maximum 150mm from the wall
  • Furring channels are installed perpendicular to the framing members

Additional information

Choose Clip and Channel

Channel, Clip

Back To Top
{"wp_error":"cURL error 28: Resolving timed out after 5522 milliseconds"}